29-1
Cisco Router and Security Device Manager 2.5 User’s Guide
OL-4015-12
CHAPT ER
29
Quality of Service
The Quality of Service (QoS) Wizard allows a network administrator to enable
Quality of Service (QoS) on the router’s WAN interfaces. QoS can also be enabled
on IPSec VPN interfaces and tunnels. The QoS edit windows enables th e
administrator to edit policies created using the wizard.

Creating a QoS Policy

Complete these steps to create a QoS policy:
Step1 If you want to review the Cisco IOS CLI commands that you send to the router
when you complete the configuration, go to the Cisco SDM toolbar, and click Edit
> Preferences > Preview commands before delivering to router. The preview
screen allows you to cancel the configuration if you want to.
Step2 In the Cisco SDM toolbar, click Configure.
Step3 In the Cisco SDM taskbar, click QoS.
Step4 In the Create QoS Policy tab, click Launch QoS Wizard.
Step5 Make configuration settings in the wizard screens. Click Next to go from the
current screen to the next screen. Click Back to return to a screen you have
previously visited.
Step6 Cisco SDM displays the Summary screen when you have completed the
configuration. Review the configuration. If you need to make changes, click Back
to return to the screen in which you need to make changes, then return to the
Summary screen.