31-21
Cisco Router and Security Device Manager 2.5 User’s Guide
OL-4015-12
Chapter31 Router Properties
vty Settings
If “any” is associated with destination, it allows access to any node on the
network supported by the router.
Recommended Action You can remove the access entry that caused this
message to appear by choosing the rule in the Rules window an d clicking
Edit. Alternatively, in the Interfaces and Connections window, you can
disassociate the rule from the interface it is applied to.
Error Message
SDM Warning: Unsupported Access Control Entry
Explanation A management policy will be read only if unsupported access
control entries (ACEs) are associated with the interface or vty line to which
you applied the management policy. You can use the CLI to remove the
unsupported ACEs. Unsupported ACEs are those that contain keywords or
syntax that Cisco SDM does not support.
Error Message
SDM Warning: SDM Not Allowed
Explanation This message is displayed if you still have not configured a
management access policy to allow a host or network to access Cisco SDM
on this router.
Recommended Action You must provide such a policy in order to make Cisco
SDM on this router accessible. You cannot navigate to other features or
deliver commands to the router until you configure a management access
policy to allow access to Cisco SDM for a host or network.