7-7
Cisco Router and Security Device Manager 2.5 User’s Guide
OL-4015-12
Chapter7 Wide Area Application Services
WAAS Reference
WCCP
Configure WCCP settings in this screen. WCCP settings specify the router
interfaces that redirect traffic to the WAAS NM, and information about the WAAS
CM.
Subnet mask Enter the subnet mask in decimal format; for example,
255.255.255.0. Or, choose the number of subnet bits; for example,
24. Entering values in one field updates the other. For example, if
you enter 255.255.255.0, the subnet bits field is automati cally
updated to display 24.
Service Module
Internal IP Address Enter the internal IP address of the WAAS network module. This IP
address must be on the same subnet as the router IP address used.
For example, if the router IP address is 10.0.0.20, the service
module internal IP address might be 10.0.0.21.
Subnet Mask Enter the subnet mask in decimal format; for example,
255.255.255.0. Or, choose the number of subnet bits; for example,
24. Entering values in one field updates the other. For example, if
you enter 255.255.255.0, the subnet bits field is automati cally
updated to display 24.
External IP Address (Optional). Enter the external IP address for the WAAS network
module. This IP address may be required to connect to the WAAS
CM.
Subnet Mask Enter the subnet mask in decimal format; for example,
255.255.255.0. Or, choose the number of subnet bits; for example,
24. Entering values in one field updates the other. For example, if
you enter 255.255.255.0, the subnet bits field is automati cally
updated to display 24.
Default Gateway
Default Gateway IP Address Enter the IP address of the default gateway router that the WAAS
service module is to use.
Table7-2 Integrated Service Engine Tab (continued)
Element Description