Cisco Systems 2.5 NHRP Map Configuration

Chapter15 DMVPN
Edit Dynamic Multipoint VPN (DMVPN)
15-16
Cisco Router and Security Device Manager 2.5 User’s Guide
OL-4015-12
Authentication String
Enter the string that DMVPN hubs and spokes must use to authenticate
themselves for NHRP transactions. The string can be up to 8 characters long. All
NHRP stations in the DMVPN must be configured with the same authentication
string.
Hold Time
Enter the number of seconds that NHRP network IDs should be ad vertised as
valid.
Network ID
Enter the NHRP Network ID. The network ID is a globally unique, 32-bit network
identifier for a nonbroadcast, multiaccess (NBMA) network. The range is 1 to
4294967295. The network ID must be unique for each NHRP station.
Next Hop Server
This area lists the IP addresses of the next hop servers that this router can contact.
This area must contain the IP address of the primary and secondary hub if this is
a spoke router. If this is a hub, this area must contain the IP addresses of the othe r
hub routers in the DMVPN.
Click Add to enter the IP address of a next hop server. Select a server, and click
Delete to delete it from the list.
NHRP Map
This area lists the available IP-to-NBMA address mappings. Click Add to create
a new map. After you create the map, it will be added to this list. Click Edit to
modify a selected map. Click Delete to remove a selected map configuration.
NHRP Map Configuration
Use this window to create or edit a mapping between IP an d NBMA addresses.