Chapter24 Security Audit
24-2
Cisco Router and Security Device Manager 2.5 User’s Guide
OL-4015-12
The Welcome page of the Security Audit wizard appears.
Step3 Click Next>.
The Security Audit Interface Configuration page appears.
Step4 The Security Audit wizard needs to know which of your router interfaces connect
to your inside network and which connect outside of your net work. For each
interface listed, check either the Inside or Outside check box to indicate where
the interface connects.
Step5 Click Next>.
The Security Audit wizard tests your router configuration to determine which
possible security problems may exist. A screen showing the progress of this action
appears, listing all of the configuration options being tested for, and whether or
not the current router configuration passes those tests.
If you want to save this report to a file, click Save Report.
Step6 Click Close.
The Security Audit Report Card screen appears, showing a list of possible security
problems.
Step7 Check the Fix it boxes next to any problems that you want Cisco Router and
Security Device Manager (Cisco SDM) to fix. For a description of the problem
and a list of the Cisco IOS commands that will be added to your configuration,
click the problem description to display a help page about that problem.
Step8 Click Next>.
Step9 The Security Audit wizard may display one or more screens requiring you to enter
information to fix certain problems. Enter the information as required and click
Next> for each of those screens.
Step10 The Summary page of the wizard shows a list of all the configuration changes that
Security Audit will make. Click Finish to deliver those changes to your router.
One-Step Lockdown
This option tests you router configuration for any potential security problems and
automatically makes any necessary configuration changes to correct any proble ms
found. The conditions checked for and, if needed, corrected are as follows:
Disable Finger Service