Chapter3 LAN Wizard
LAN Wizard: Switch Port
3-6
Cisco Router and Security Device Manager 2.5 User’s Guide
OL-4015-12
Field Reference
LAN Wizard: Switch Port
This screen lets you assign an existing VLAN number to the switch port or to
create a new VLAN interface to be assigned to the VLAN switch port.
Field Reference
Table3-6 IP Address and Subnet Mask
Element Description
Single Device If this switch port will be connected to a single device, such as a single PC
or IP phone, or if this device will be connected to a port on a networking
device, such as another switch, that is an access mode port, th en choose
Single Device.
Network Device If this switch port will be connected to a port on a network device, such as
another switch, that is a trunking mode, choose Network Device.
Table3-7 IP Address and Subnet Mask
Element Description
Existing VLAN If you want to assign the switch port to a VLAN that has alre ady been
defined, such as the default VLAN (VLAN 1), enter the VLAN ID numbe r
in the Network (VLAN) Identifier field.
New VLAN If you want to create a new VLAN interface to which the switch port will
be assigned, enter the new VLAN ID number in the New VLAN field, and
then enter the IP address and subnet mask of the new VLAN logical
interface in the IP Address and Subnet Mask fields.
Include this VLAN in an
IRB bridge...
If you want the switch port to form part of a bridge with your wireless
network, check this box. The other part of the bridge must be configured
using the Wireless Application. The IP address and Subnet mask fields
under New VLAN are disabled when this box is checked.