12-7
Cisco Router and Security Device Manager 2.5 User’s Guide
OL-4015-12
Chapter12 Easy VPN Remote
Creating an Easy VPN Remote Connection

Warning Messages

Cisco SDM displays a warning message when you click Next if it detects any of
the following problems:
•There are no devices added.
•If you enter an IP address for the non accessible devices that is already used
by a router interface.
•If you enter an IP address for the non accessible devices that is already used
as a global IP address for an accessible device.
•If you enter local IP address for a device that falls outside the subne t for the
LAN interface it connects to.
Easy VPN Remote Wizard: Interfaces and Connection Settings
In this window, you specify the interfaces that will be used in the Easy VPN
configuration.
Field Reference
Table12-4 describes the fields in th is screen.
Non Accessible Devices
IP Address Enter the IP address that you reserved for non accessible devices in this field.
This IP address must be in the same subnet as the device global IP addresses.
Cisco SDM creates a NAT rule to translate IP addresses of devices that do not
need to be reached from other networks to this IP address, and assigns this IP
address to a new loopback interface.
Subnet Mask Enter the subnet mask in decimal format; for example, 255.255.255.0. Or,
choose the number of subnet bits; for example, 24. Entering values in one field
updates the other. For example, if you enter 255.255.255.0, the subnet bits field
is automatically updated to display 24.
Table12-3 Identical Address Configuration Fields (continued)
Element Description