27-49
Cisco Router and Security Device Manager 2.5 User’s Guide
OL-4015-12
Chapter27 Cisco IOS IPS
Edit IPS
Summary Key
The type of information to use to determine when to summarize. For example, if
you choose both attacker and victim addresses and ports, each time you have
these 4 pieces of information for an event, summarization occursY. If you choose
attacker address, only that piece of information is needed.
Specify Global Summary Threshold
You can optionally specify numerical thresholds to use for determining when to
summarize events to the log. If you choose Yes , you can specify a global summary
threshold, and a summary interval.

Status

You can specify whether the signature should be enabled, disabled, or retired in
the Status box. Additionally, the Status box can display the signatures that you
have obsoleted.
File Selection
This window allows you to load a file from your router. Only DOSFS file systems
can be viewed in this window.
The left side of window displays an expandible tree representing the directory
system on your Cisco router flash memory and on USB devices connected to that
router.
The right side of the window displays a list of the names of the files and
directories found in the directory that is specified in the left side of the window.
It also shows the size of each file in bytes, and the date and time each file and
directory was last modified.
You can choose a file to load in the list on the right side of the window. Below the
list of files is a Filename field containing the full path of the specified file.
Note If you are choosing a configuration file to provision your router, the file must be
a CCCD file or have a .cfg extension.