Cisco Systems 2.5 Write to Startup Config, Reset to Factory Defaults, File Management

Chapter43 File Menu Commands
Write to Startup Config
43-2
Cisco Router and Security Device Manager 2.5 User’s Guide
OL-4015-12
If Cisco SDM is being used to configure a Cisco 7000 router, the check box Save
running config. to router's startup config. will be disabled if there are boot
network or boot host commands present with service config commands in the
running configuration.
Cancel
Click this button to discard the configuration change and close the Cisco SDM
Deliver to Router dialog box.
Save to File
Click this button to save the configuration changes shown in the window to a text
file.
Write to Startup Config
Writes the router’s running configuration file to the router startup configuration.
If Cisco SDM is being used to configure a Cisco 7000 router, this menu item will
be disabled if there are boot network or boot host commands present with
service config commands in the running configuration.
Reset to Factory Defaults
See Reset to Factory Defaults.
File Management
This window allows you to view and manage the file system on your Cisco router
flash memory and on USB flash devices connected to that router. Only DOSFS
file systems can be viewed and managed in this window.
The left side of window displays an expandible tree representing the directory
system on your Cisco router flash memory and on USB flash devices connected
to that router.