7Enter the team name and select the appropriate team mode. The types of team include Smart Load Balance and Fail Over, FEC/GEC, and Link Aggregation (IEEE 802.3ad).
8Click OK.
9Select the team name in the Configuration box.
10Select an unassigned adapter to add to the team and click > adjacent to Team Members to add the adapter. Repeat for the second adapter.
NOTE: Alteon and Broadcom Ethernet adapters can be grouped into failover teams with an Intel 82559 LOM; however, assigning a LOM to be a primary adapter is not supported.
11Click OK.
Removing an Adapter From a Network Team
To remove an adapter from a network team through the Network Teaming utility, Broadcom Advanced Server Control Suite, perform the following steps:
1Click Maintenance.
2Click Terminal Services.
3Log into the Terminal Services session as administrator.
4Under Administrative Tools on the Advanced Administration Menu, click Broadcom Network Teaming. The Broadcom Advanced Server Control Suite window is displayed on the desktop.
5Click the tab on the Load Balance/Virtual LAN folder.
6Select the team name in the Configuration box.
7Select an adapter in Team Members and click < adjacent to Team Members to remove the adapter.
8Click OK to apply the change.
Advanced Features
