8-4 Online Server Diagnostics
www.dell.com | support.dell.com
12 Click Next.
13 When the InstallShield Wizard completes installing the files, click Finish.

Installing the JAVA Runtime Environment

If your system does not have the Java 2 Runtime Environment installed on it, you will be
asked whether you want to install it the first time you run the Online Server Diagnostics.
1Because the Java 2 Runtime Environment is needed to run the Online Server
Diagnostics, click Yes.
2Click Yes to accept the agreement.
3Click Next.
After the installation is completed, you can run the Online Server Diagnostics.
Using the Online Server Diagnostics
This section explains how to start, configure, and run your server diagnostics:

Starting the Online Server Diagnostics

To start the diagnostics, perform one of the following procedures:
1On the NAS Manager primary menu, click Maintenance.
2Click Online Server Diagnostics.

Specifying a Target Appliance

NOTE: Online Server Diagnostics must be installed on both the remote appliance and the local
appliance.
To specify the NAS appliance on which you want to run diagnostic tests (the target),
perform the following steps:
If you have not already done so, start the diagnostics.
In the Welco me window, perform one of the following tasks:
To run diagnostics on the local server, click Run diagnostics on
NNN.NNN.NNN.NNN.