Dell 750N. 755N Array Manager Common Tasks, Creating a New Volume, Deleting an Existing Volume

w w w . d e l l . c o m s u p p o r t . d e l l . c o m

Although the Dell OpenManage™ Array Manager provides a comprehensive solution to storage management, you should use it only for advanced features that cannot be performed from the Disks tab in the NAS Manager. You can access the Array Manager through the Terminal Services Advanced Client in the NAS Manager.

Array Manager allows you to configure your storage devices and the logical volumes contained in your system. Array Manager displays storage configuration in both a physical and a logical view. The physical view shows the physical connections between the storage devices. The logical view shows a logical representation of your storage as logical volumes.

Array Manager provides a single console for array and volume configuration, from which you can do the following:

•Manage the hardware redundant array of independent disks (RAID) solution

•Display all of your storage information in a graphical environment

Array Manager Common Tasks

This section provides a high-level description of the most common procedures performed under Array Manager.

Creating a New Volume

1Create a RAID 5 virtual disk from the available pool of physical drives.

2Write a signature to the disk created.

3Upgrade the disk to dynamic.

4Create a new volume on the upgraded disk.

5Assign the next available drive letter and format the volume NT File System (NTFS).

NOTE: The PowerVault 750N and 755N only support NTFS partitions. Formatting all partitions as NTFS allow for advanced features only available under that file system.

Deleting an Existing Volume

1Select and delete the desired volume.

2Revert the disk that contained the volume to a basic disk.

3Determine the virtual disk that corresponds to the basic disk.

4Delete that virtual disk.

3-2

Advanced Disk and Volume Management Using Array Manager