Delta Electronics ASDA-B Series manual GR4

Chapter 7 Servo ParametersASDA-B Series

P1 - 15▲	GR4	Electronic Gear Ratio (2nd Numerator) (N2)	Communication Addr.: 010FH
	Default: 1		Related Section:
	Applicable Control Mode: P		Section 6.2.4, P1-44, P1-45
	Unit: pulse		DI GNUM0(11) in Table 7.A
	Range: 1 ~ 32767
	Settings:

The electronic gear numerator value can be set via external DI signal (refer to Table 7.A).

DI Name	DI Status	Selected Electronic Gear
	Not select (Note 1)	P1-44, P1-45
GNUM0	0	P1-44, P1-45
	1	P1-44, P1-45

NOTE

1)DI signal can be selected by parameter P2-10 to P2-15 and Table 7.A. If uses only need to use one group of electronic gear, it allows users not to select GNUM0.

P1 - 16

P1 - 17

P1 - 18

P1 - 19

P1 - 20

P1 - 21

P1 - 22

P1 - 23

P1 - 24

P1 - 25

Reserved	Communication Addr.: 0110H
Reserved	Communication Addr.: 0111H
Reserved	Communication Addr.: 0112H
Reserved	Communication Addr.: 0113H
Reserved	Communication Addr.: 0114H
Reserved	Communication Addr.: 0115H
Reserved	Communication Addr.: 0116H
Reserved	Communication Addr.: 0117H
Reserved	Communication Addr.: 0118H
Reserved	Communication Addr.: 0119H

7-30 Revision January, 2009