Delta Electronics ASDA-B Series manual SPD1, SPD2, SPD3

Chapter 7 Servo ParametersASDA-B Series

P1 - 09	SPD1	1st Speed Command or Limit	Communication Addr.: 0109H
	Default: 100		Related Section:
	Applicable Control Mode: S/T		S mode: Section 6.3.5
	Unit: rpm		T mode: P1-02

Range: -5000 ~ +5000

Settings:

1st Speed Command

In Speed mode, this parameter is used to set speed 1 of internal speed command.

1st Speed Limit

In Torque mode, this parameter is used to set speed limit 1 of internal speed command.

P1 - 10

SPD2	2nd Speed Command or Limit	Communication Addr.: 010AH
Default: 200		Related Section:
Applicable Control Mode: S/T		S mode: Section 6.3.5
Unit: rpm		T mode: P1-02

Range: -5000 ~ +5000

Settings:

2nd Speed Command

In Speed mode, this parameter is used to set speed 2 of internal speed command.

2nd Speed Limit

In Torque mode, this parameter is used to set speed limit 2 of internal speed command.

P1 - 11

SPD3	3rd Speed Command or Limit	Communication Addr.: 010BH
Default: 300		Related Section:
Applicable Control Mode: S/T		S mode: Section 6.3.5
Unit: rpm		T mode: P1-02

Range: -5000 ~ +5000

Settings:

3rd Speed Command

In Speed mode, this parameter is used to set speed 3 of internal speed command.

3rd Speed Limit

In Torque mode, this parameter is used to set speed limit 3 of internal speed command.

7-28 Revision January, 2009