Delta Electronics ASDA-B Series manual Kblt, Kclr, Memory Block Clear Communication Addr BH

Chapter 7 Servo ParametersASDA-B Series

2:LED testing.

3:Dynamical memory testing (RAM). The testing time is approx. 18 seconds.

4:Data memory testing (EEPROM). The testing time is approx. 140 seconds.

This parameter is used to test the hardware of the keypad. Since the life of the data memory is limited and using this parameter will consumed the life of data memory, it is not recommended to use this parameter and change the factory default setting if not necessary.

P8 - 10

KBLT	LCD Backlight Display	Communication Addr.: 080AH
Default: 0		Related Section: N/A

Applicable Control Mode: P/S/T

Unit: N/A

Range: 0 ~ 1

Settings:

0:OFF. LCD backlight is going off.

1:ON. LCD backlight is going on.

P8 - 11

KCLR	Memory Block Clear	Communication Addr.: 080BH
Default: 0		Related Section: N/A
Applicable Control Mode: P/S/T
Unit: N/A
Range: 0 ~ 124
Settings:
ASD-PU-01A

ASD-PU-01B

Revision January, 2009 7-71