Delta Electronics manual Trial Run and Tuning ProcedureASDA-B Series

Chapter 5 Trial Run and Tuning ProcedureASDA-B Series

Item	Content
	z Ensure that the cables are not damaged, stressed excessively or loaded heavily.
	When the motor is running, pay close attention on the connection of the cables
	and notice that if they are damaged, frayed or over extended.
	z Check for abnormal vibrations and sounds during operation. If the servo motor is
	vibrating or there are unusual noises while the motor is running, please contact
	the dealer or manufacturer for assistance.
Inspection during	z Ensure that all user-defined parameters are set correctly. Since the
	characteristics of various machinery are different, in order to avoid accident or
operation	cause damage, do not adjust the parameter abnormally and ensure the
(Control power is	parameter setting is not an excessive value.
applied)）	z Ensure to reset some parameters when the servo drive is off (Please refer to
	Chapter 7). Otherwise, it may result in malfunction.
	z If there is no contact sound or there be any unusual noises when the relay of the
	servo drive is operating, please contact your distributor for assistance or contact
	with Delta.
	z Check for abnormal conditions of the power indicators and LED display. If there is
	any abnormal condition of the power indicators and LED display, please contact
	your distributor for assistance or contact with Delta.

5-2 Revision January 2009