Delta Electronics ASDA-B Series manual Press Mode key to return to previous display, Yes

Chapter 4 Display and OperationASDA-B Series

SAVE Mode (Save parameter settings from the Drive to the Keypad)

1.When the power is applied to the AC servo drive, the digital keypad will enter into the monitor mode first.

2.In monitor mode, pressing SAVE key can switch to SAVE mode.

3.In SAVE mode, pressing SAVE key can execute the function the users select and save the new parameter settings.

4.In SAVE mode, pressing UP and DOWN key can save the desired memory block that the users want to save.

5.If the desired memory block has not been used, the LCD display will show the message “xxxxxxxx”. If the desired memory block has been used and there are parameters data saved in it, the LCD display will show the MCU version of the servo drive and the preset file name, such as “BL001-XX”. The last two words “XX” can be modified by the users and its range is within 0 ~ 9 or A ~Z. The users can select the words by using UP and DOWN keys and change the words by using SHIFT key.

6.In SAVE mode, pressing MODE key once can return to the previous display and finally exit the SAVE mode. However, if the users have pressed the SAVE key, i.e. the SAVE operation has been executed, the MODE key will become disabled, the users cannot return to previous display and only can move to the next step.

7.The users can save the parameters in some memory block repeatedly on the condition that the version, inertia and models of the servo drives should be the same. If one of the parameters is set by the servo drive in different condition, it cannot be saved into the same memory block with other parameters and must be saved to other memory blocks. Before re-using the same memory block, please perform the “Memory Block Clear” function first (Please see the description of parameter P8-11).

Figure 4.3

SAVE

KPD SAVE yes?

SAVE

Press MODE key to return to previous display

SAVE

KPD SAVE 0.000 ROM00:********

MODE

KPD SAVE 0.000

KPD SAVE 0.000 ROM01:********

KPD SAVE 0.000 ROM24:********

NO KPD SAVE 0.000

ROM00:saving

YES

KPD SAVE 0.006

ROM00:BL003-00

SAVE

ROM00:********?

SAVE

4-4 Revision January 2009