General Configuration Command Set
Resetting the Device
3-90 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
This example shows how to schedule a reset at a specific future time and include a reason for the
reset:
3.2.8.4 reset in
Use this command to schedule a system reset after a specific time. This feature is useful for loading
a new boot image.
reset in hh:mm [reason reason]
Syntax Description
Command Defaults
If a reason is not specified, none will be applied.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to schedule a device reset in 5 hours and 20 minutes:
3.2.8.5 clear config
Use this command to clear the user-defined switch configuration parameters stored in NVRAM.
This resets the device back to its factory default settings, while giving you the option to maintain
the system IP address and SSH (Secure Shell) host keys. For a list of default settings for this device,
refer to Section 3.1.1.
clear config
Matrix>reset at 20:00 10/12 reason “software upgrade to 6.1”
hh:mm Specifies the number of hours and minutes into the future
to perform a reset.
reason reason (Optional) Specifies a rea son for the reset. A string
containing a space in the text must be enclosed in quotes.
Matrix>reset in 5:20