Port Configuration Command Set
Configuring Static Port Trunking
4-56 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
4.3.11.5 set trunk port
Use this command to add one or more trunk ports to an existing trunk when the device is set to port
trunking mode.
set trunk port trunk_name port-string
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to add Fast Ethernet front panel ports 3 through 6 to the “blue” trunk:
4.3.11.6 clear trunk port
Use this command to remove a port from a trunk when the device is set to port trunking mode.
clear trunk port trunk_name port-string
trunk_name Specifies the name of the trunk to which the trunk port
will be added.
port-string Specifies the designation of the port(s) to be added to the
trunk. For a detailed description of possible port-string
values, refer to Section 4.1.2.
Matrix>set trunk port blue fe.0.3-6