Port Priority and Classification Configuration Commands
Configuring Priority Classification
9-16 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
9.3.4 Configuring Priority Classification Purpose
To perform the following functions:
•Display the current priority, classification, and description entries of each classification rule.
•Assign priorities according to classification rules.
•Add/delete a priority and associated protocol entry.
•Enable or disable the priority tag override feature.
•Assign an 8-bit Type of Service (TOS) value to incoming IP frames.
•Overwrite an existing TOS value.
Commands
The commands used in configuring priority classification are listed below and described in the
associated section.
•show priority classification (Section 9.3.4.1)
•set priority classification (Section 9.3.4.2)
•clear priority classification (Section 9.3.4.4)
•set priority classification ingress (Section 9.3.5.1)
•clear priority classification ingress (Section 9.3.5.2)
•set priority classification tosvalue (Section 9.3.4.5)
•clear priority classification tosvalue (Section 9.3.4.6)
•show priority classification qtagoverride (Section 9.3.4.7)
•set priority classification qtagoverride (Section 9.3.4.8)