SNMP Command Set
Configuring SNMP Users, Groups and Communities
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide 5-15
5.2.2.1 show snmp user
Use this command to display information about users. These are people registered to access SNMP
management.
show snmp user [user [remote remot e]]
Syntax Description
Command Defaults
•If user is not specified, information about all SNMP users will be displayed.
•If remote is not specified, user information about the local SNMP engine will
be displayed.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display information for the SNMP “guest” user:
Table 5-4 shows a detailed explanation of the command output.
user (Optional) Displays information about a specific user.
remote remote (Optional) Displays information about users on a specific
remote SNMP engine.
Matrix>show snmp user guest
--- SNMP user information ---
EngineId: 00:00:00:63:00:00:00:a1:00:00:00:00
Username = Guest
Auth protocol = usmNoAuthProtocol
Privacy protocol = usmNoPrivProtocol
Storage type = nonVolatile
Row status = active