General Configuration Command Set
Setting Basic Device Properties
3-42 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
Example
This example shows how to set the terminal columns to 50:
3.2.2.15 set system timeout
Use this command to set the time (in minutes) an idle local (console) or remote login session will
remain connected before timing out.
set system timeout timeout [console | remote]
Syntax Description
Command Defaults
If console or remote are not specified, both timeout values will be set.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to set the system timeout for both console and remote logins to 10
minutes:
3.2.2.16 show summertime
Use this command to display daylight savings time settings.
show summertime
Syntax Description
None.
Matrix>set terminal cols 50
timeout Specifies the number of minutes the system will remain idle
before timing out. Valid values are 1 to 60.
console | remote (Optional) Sets the console or remote (Telnet) timeout.
Matrix>set system timeout 10