SNMP Command Set
Configuring SNMP Users, Groups and Communities
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide 5-17
•If remote is not specified, the user will be registered for the local SNMP
engine.
•If storage type is not specified, nonvolatile will be applied.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to create a new SNMP user named “netops” with MD5 authentication and
privacy encryption:
5.2.2.3 clear snmp user
Use this command to remove a user from the SNMPv3 security-model list.
clear snmp user user [remote remote ]
Syntax Description
Command Defaults
If remote is not specified, the user will be removed from the local SNMP engine.
Command Type
Switch command.
Command Mode
Read-Write.
Matrix>set snmp user netops authentication md5 privacy
Matrix>Enter authentication password>***********
Matrix>Reenter authentication password>***********
Matrix>Enter privacy password>***********
Matrix>Reenter privacy password>***********
user Specifies an SNMPv3 user to remove.
remote remote (Optional) Removes the user from a specific remote
SNMP engine.