Startup and General Configuration Summary
Factory Default Settings
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide 3-5
Spanning Tree
maximum aging time Set to 20 seconds.
Spanning Tree path
cost Set to 100 for Ethernet; 10 for Fast Ethernet; and 1 for Gigabit
Ethernet.
Spanning Tree
point-to-point Set to auto for all Spanning Tree ports.
Spanning Tree port
priority All ports with bridge priority are set to 128 (medium priority).
Spanning Tree priority Bridge priority is set to 32768.
Spanning Tree real
time BPDU message
age mode
Disabled.
Spanning Tree
topology change trap
suppression
Enabled on edge ports.
Spanning Tree transmit
hold count Set to 3.
Spanning Tree version Set to mstp (Multiple Spanning Tree).
SSH (Secure Shell) Enabled with the following settings: Listening port: 22. Rekey
interval: 3600 seconds. Login grace time: 60 seconds. Authentication
attempts allowed: 3. Nagle’s algorithm enabled.
System baud rate Set to 9600 baud.
System contact Set to a blank string.
System location Set to a blank string.
System name Set to a blank string.
Table 3-1 Default Device Settings for Basic an d Switch Mode Operation (Continued)
Device Feature Default Setting