Logging and Network Management Command Set
Monitoring Switch Network Events and Status
11-22 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
Example
This command shows how to copy the audit trail history buffer to msgs.log file on the Syslog
server:
11.2.2 Monitoring Switch Network Events and Status
Purpose
To display switch events and command history, to set the size of the history buffer, and to display
network and RMON statistics.
Commands
Commands to monitor switch network events and status are listed below and described in the
associated section as shown.
•show eventlog (Section 11.2.2.1)
•clear eventlog (Section 11.2.2.2)
•history (Section 11.2.2.3)
•repeat (Section 11.2.2.4)
•show history (Section 11.2.2.5)
•set history (Section 11.2.2.6)
•show netstat (Section 11.2.2.7)
•show rmon stats (Section 11.2.2.8)
•show users (Section 11.2.2.9)
•disconnect (Section 11.2.2.10)
11.2.2.1 show eventlog
Use this command to display system events for the switch.
show eventlog
Syntax Description
None.
Matrix>copy audit-trail tftp://172.43.10.77/msgs.log