Enterasys Networks 1G58x-09, 1H582-xx, E1 Series Startup and General Configuration

Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide 3-1

Startup and General Configuration

This chapter describes factory default settings and the Startup and General Configuration set of

commands.

At startup, the Matrix E1 device is configured with many defaults and standard features. The

following sections provide information on how to review and change factory defaults, how to

customize basic system settings to adapt to your work environment, and how to prepare to run the

device in router mode.

The following tables list factory default device settings available on the Matrix E1. Table 3-1 lists

default settings for basic operation and for when the device is in switch mode. Table 3-2 lists default

settings for router mode operation.

Table 3-1 Default Device Settings for Basic and Sw itch Mode Operation

Device Feature Default Setting

802.1X Disabled.

CDP (Enterasys)

Discovery Protocol Auto enabled on all ports.

CDP interval Transmit frequency of CDP messages set to 60 seconds.

Cisco Discovery

Protocol Disabled.

DNS Enabled.

Community name Public.