Spanning Tree Configuration Command Set
Reviewing and Setting Spanning Tree Bridge Parameters
6-10 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
Example
This example shows how to disable Spanning Tree on the device:
6.2.1.3 show spantree version
Use this command to display the current version of the Spanning Tree protocol running on the
device.
show spantree version
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display Spanning Tree version information:
Matrix>set spantree disable
Matrix>show spantree version
Spanning Tree Version = MSTP