Logging and Network Management Command Set
Configuring Convergence End Points (CEP) Phone Detection
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide 11-75
•set cep (Section 11.2.6.2)
•set cep port (Section 11.2.6.3)
•set cep policy (Section 11.2.6.4)
•set cep detection (Section 11.2.6.5)
•set cep detection type (Section 11.2.6.6)
•set cep detection address (Section 11.2.6.7)
•set cep detection protocol (Section 11.2.6.8)
•set cep detection porthigh (Section 11.2.6.9)
•set cep initialize (Section 11.2.6.10)
•clear cep (Section 11.2.6.11)
11.2.6.1 show cep
Use this command to display CEP phone detection settings.
show cep [connections] [detection] [policy] [[port] [port-string]]
Syntax Description
Command Defaults
If no parameters are specified, all CEP settings will be displayed for all ports.
Command Mode
Read-Only.
connections (Optional) Displays CEP connections.
detection (Optional) Displays all discovery parameters being used for
CEP detection.
policy (Optional) Displays the global CEP policy per protocol.
port port-string (Optional) Displays CEP status for one or more ports. For a
detailed description of possible port-string values, refer to
Section 4.1.2.