VLAN Configuration Command Set
Configuring the VLAN Egress List
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide 7-21
Command Mode
Read-Write.
Example
This example shows how to add front panel Fast Ethernet ports 5 through 10 to the egress list of
VLAN 7. This means that these ports will transmit VLAN 7 frames:
7.3.4.4 clear vlan egress
Use this command to remove ports from one or more VLAN egress lists.
clear vlan egress vlan-list port-string
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Examples
This example shows how to remove Fast Ethernet port 1 on expansion module 3 from the egress list
of VLANs 2 and 9:
Matrix>set vlan egress 7 fe.0.5-10
vlan-list Specifies the VLAN(s) from which port(s) will be removed
from the egress list.
port-string Specifies port(s) to remove from the VLAN egress list of
the specified vlan-id. For a detailed description of possible
port-string values, refer to Section 4.1.2.
Matrix>clear vlan egress 2,9 fe.3.1