SNMP Command Set
Configuring SNMP Notification Parameters
5-58 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
Command Defaults
•If not specified, mask is set to 255.255.255.255
•If not specified, subtree will be included.
•If storage type is not specified, nonvolatile will be applied.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to create an SNMP notify filter called “noauthentication” with a MIB
subtree ID of 1, to include all management targets:
This example shows how to create an SNMP notify filter called “pilot1” with a MIB subtree ID of
1.3.6:
5.2.7.11 clear snmp notifyfilter
Use this command to delete an SNMP notify filter configuration.
clear snmp notifyfilter profile subtree oid
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Matrix>set snmp notifyfilter noauthentication subtree 1 included
nonvolatile
Matrix>set snmp notifyfilter pilot1 subtree 1.3.6
profile Specifies an SNMP filter notify name to delete.
subtree oid Specifies a MIB subtree containing the filter to be
deleted.