SNMP Command Set
Configuring SNMP Users, Groups and Communities
5-18 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
Example
This example shows how to remove the SNMP user named “bill”:
5.2.2.4 show snmp group
Use this command to display an SNMP group configuration. An SNMP group is a collection of
SNMPv3 users who share the same access privileges.
show snmp group [groupname] [user user] [security-model {v1 | v2 | v3}]
Syntax Description
Command Defaults
•If groupname is not specified, information about all SNMP groups will be
displayed.
•If user is not specified, information about all SNMP users will be displayed.
•If security-model is not specified, user information about all SNMP versions
will be displayed.
Command Type
Switch command.
Command Mode
Read-Only.
Matrix>clear snmp user bill
groupname
groupname (Optional) Displays information for a specific SNMP
group.
user user (Optional) Displays information about users within the
specified group.
security-model v1 |
v2 | v3 (Optional) Displays information about groups assigned to
a specific security SNMP model.