Policy Classification Configuration Command Set
Assigning Classification Rules to Policy Profiles
8-10 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
Syntax Description
profile-index Specifies a profile index number. Assigned to this
classification rule with the set policy profile command
(Section 8.3.1.2). Valid values are 1 to 65535.
classify-index Specifies a number of the classification rule. Valid values
are 1 to 65535.
vlan | cos Specifies whether this rule will classify to a VLAN or
Class-of-Service.
NOTE: VLAN classification is available for
Ethernet II type (ether) and 802.3 SAP (llc)
frames. Untagged frames received with any of
the other VLAN classification protocols listed
below will be dropped and not forwarded.
classify-value Specifies a Class-of-Service value or VLAN ID to
associate with the classification rule. Valid CoS values are
0 - 7. Valid VLAN ID values and associated actions are:
•4095: permits these frames to forward on all VLANs.
•0: denies and discards these frames for all VLANs.
•1: classifies these frames the default VLAN.
•2 - 4094: classifies these frames to the specified
VLAN.
ether Classifies based on type field in Ethernet II packet.
ipbil Classifies based on bilateral IP address.
ipdest Classifies based on destination IP address.
ipproto Classifies based on Protocol field in IP packet.
ipsource Classifies based on source IP address.
iptos Classifies based on Type of Service field in IP packet.
ipxbil Classifies based on bilateral IPX address.
ipxbilsocket Classifies based on bilateral IPX socket.
ipxclass Classifies based on transmission control in IPX.
ipxdest Classifies based on destination IPX address.
ipxdestsocket Classifies based on destination IPX socket.