Enterasys Networks 1G58x-09, 1H582-xx, E1 Series

IP Configuration Command Set

Configuring Broadcast Settings

12-26 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide

Command Type

Router command.

Command Mode

Interface configuration: Matrix>Router(config-if(Vlan <vlan_id>))#

Command Defaults

None.

Example

This example shows how to permit UDP broadcasts from hosts on networks 191.168.1.255 and

192.24.1.255 to reach servers on those networks:

Matrix>Router(config)#ip forward-protocol udp

Matrix>Router(config)#interface vlan 1

Matrix>Router(config-if(Vlan 1))#ip helper-address 192.168.1.255

Matrix>Router(config)#interface vlan 2

Matrix>Router(config-if(Vlan 2))#ip helper-address 192.24.1.255