SNMP Command Set
Configuring SNMP Access Rights
5-28 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
•If security-model is not specified, access information for all SNMP versions
will be displayed.
•If access level is not specified, information for all levels will be displayed.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display SNMP access information:
Table 5-7 shows a detailed explanation of the command output.
Matrix>show snmp access
Group Name: initial
Security Model: SNMPv3
Security Level: No authentication. No Privacy.
Storage Type: nonvolatile
Row Status: active
Read View Name: internet
Write View Name: internet
Notify View Name: internet
------------------------------
Group Name: initial-restricted
Security Model: - SNMPv3
Security Level: No authentication. No Privacy.
Storage Type: nonvolatile
Row Status: active
Read View Name: internet
Write View Name:
Notify View Name: internet
Table 5-7 show snmp access Output Details
Output What It Displays...
Group Name SNMPv3 group name.
Security Model Security model applied to this group. Valid types
are: SNMPv1, SNMPv2, and SNMPv3.