SNMP Command Set
Configuring SNMP Users, Groups and Communities
5-20 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
5.2.2.5 set snmp group
Use this command to create an SNMP group. This associates SNMPv3 users to a group that shares
common access privileges.
set snmp group groupname user user security-model {v1 | v2 | v3} [volatile |
nonvolatile]
Syntax Description
Command Defaults
If storage type is not specified, nonvolatile storage will be applied.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to create an SNMP group called “anyone”, assign a user named “public”
and assign SNMPv3 security to the group:
groupname Specifies an SNMP group name to create.
user user Specifies an SNMPv3 user name to assign to the group.
security-model v1 |
v2 | v3 Specifies an SNMP security model to assign to the group.
volatile |
nonvolatile (Optional) Specifies a storage type for SNMP entries
associated with the group.
Matrix E7(rw)->set snmp group anyone user public security-model v3