General Configuration Command Set
Setting Basic Device Properties
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide 3-31
3.2.2.1 show system resources
Use this command to display the CPU type, NVRAM installed and other resources installed in the
system.
show system resources
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display system resources:
Matrix>show system resources
Cpu Type : MPC8245 300 MHz
Local Memory Installed : 64 MB
Local Memory Used : 56015752 Bytes
Installed NVRAM : 1024 kB
Used NVRAM : 902144 Bytes
Installed Flash : 8192 kB
Used Flash : 6580072 Bytes
Switch Load : 0%
Switch Peak Load : 0%
Switch Peak Load Time : 3 days, 7 hours, 23 minutes, 6 seconds