Enterasys Networks 1G58x-09, 1H582-xx, E1 Series

Startup and General Configuration Summary

Factory Default Settings

3-2 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide

Does not apply to MATRIX E7.

Convergence End

Points phone detection Disabled globally and on all ports.

EAPOL Disabled.

EAPOL authentication

mode When enabled, set to auto for all ports.

Flow age time Set to 30 seconds

Flow Setup Throttling

(FST) Disabled. When enabled, the flow limit notification and shutdown

functions are disabled. The notification interval is set to 120 seconds

and maximum flow count is set to 128000 seconds.

GARP timer Join timer set to 20 centiseconds; leave timer set to 60 centiseconds;

leaveall timer set to 1000 centiseconds.

GVRP Globally enabled.

Host VLAN Assigned to default (VID 1) VLAN.

IGMP Disabled. When enabled, query interval is set to 125 seconds and

response time is set to 100 tenths of a second.

IP mask and gateway Subnet mask set to 255.255.0.0; default gateway set to 0.0.0.0

IP routes No static routes configured.

Jumbo frame support Disabled on all ports.

Link aggregation

(LACP) LACP is enabled on all ports.

Lockout Set to disable Read-Write and Read-Only users, and to lockout the

default admin (Super User) account for 15 minutes, after 3 failed

Logging Syslog port set to UDP port number 514. Logging severity level set

to 5 (warning conditions) for all applications.

MAC aging time Set to 300 seconds.

Table 3-1 Default Device Settings for Basic and Switch Mode Operation (Continued)

Device Feature Default Setting