VLAN Configuration Command Set
Enabling/Disabling GVRP (GARP VLAN Registration Protocol)
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide 7-45
7.3.8.2 show garp timer
Use this command to display GARP timer values set for one or more ports.
show garp timer [port-string]
Syntax Description
Command Defaults
If port-string is not specified, GARP timer information will be displayed for all
ports.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display GARP timer information on Fast Ethernet front panel ports 1
through 10:
port-string (Optional) Displays GARP timer information for specific
port(s). For a detailed description of possible port-string
values, refer to Section 4.1.2.
NOTE: For a functional description of the terms join, leave, and leaveall timers, refer
to the standard IEEE 802.1Q documentation, which is not supplied with this device.