Process Overview: Routing Protocol Configuration
Configuring OSPF
13-26 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
13.1.2 Configuring OSPF
Purpose
To enable and configure the Open Shortest Path First (OSPF) routing protocol.
OSPF Configuration Task List and Commands
Table 13-2 lists the tasks and commands associated with OSPF configuration. Commands are
described in the associated section as shown.
.
NOTE: Enabling OSPF with the router ospf and network commands are required if
you want to run OSPF on the device. All other tasks are optional.
Table 13-2 OSPF Configuration Task List and Commands
To do this... Use these commands...
Enable OSPF configuration mode,
associate a network and assign a router
ID.
router ospf (Section 13.1.2.1)
network (Section 13.1.2.2)
router id (Section 13.1.2.3)
Configure OSPF Interface Parameters.
•Set the cost of sending a packet on
an OSPF interface. ip ospf cost (Section 13.1.2.4)
•Set priority to help determine the
OSPF designated router for the
network.
ip ospf priority (Section 13.1.2.5)
•Adjust timers and message
intervals. timers spf (Section 13.1.2.6)
ip ospf retransmit-interval (Section 13.1.2.7)
ip ospf transmit-delay (Section 13.1.2.8)
ip ospf hello-interval (Section 13.1.2.9)
ip ospf dead-interval (Section 13.1.2.10)