VLAN Configuration Command Set
Enabling/Disabling GVRP (GARP VLAN Registration Protocol)
7-46 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
Table 7-5 provides an explanation of the command output. For details on using the
set gvrp command to enable or disable GVRP, refer to Section7.3.8.3. For details
on using the set garp timers command to change default timer values, refer to
Section 7.3.8.4.
Matrix>show garp timer fe.0.1-10
Port based GARP Configuration: (Timer units are centiseconds)
Port Number Join Leave Leaveall
----------- ---------- ---------- ----------
fe.0.1 20 60 1000
fe.0.2 20 60 1000
fe.0.3 20 60 1000
fe.0.4 20 60 1000
fe.0.5 20 60 1000
fe.0.6 20 60 1000
fe.0.7 20 60 1000
fe.0.8 20 60 1000
fe.0.9 20 60 1000
fe.0.10 20 60 1000
Table 7-5 show gvrp configuration Output Details
Output What It Displays...
Port Number Port designation. For a detailed description of possible
port-string values, refer to Section 4.1.2.
Join Join timer setting.
Leave Leave timer setting.
Leaveall Leavall timer setting.