Logging and Network Management Command Set
Configuring Simple Network Time Protocol (SNTP)
11-60 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
11.2.4 Configuring Simple Network Time Protocol (SNTP)
Purpose
To configure the Simple Network Time Protocol (SNTP), which synchronizes device clocks in a
network. For other time-related commands, see Section 3.2.2, “Setting Basic Device Properties,”
on page 3-30.
Commands
Commands to configure SNTP are listed below and described in the associated section as shown.
•show sntp (Section 11.2.4.1)
•set sntp client (Section 11.2.4.2)
•set sntp broadcastdelay (Section 11.2.4.3)
•set sntp poll-interval (Section 11.2.4.4)
•set sntp server (Section 11.2.4.5)
•clear sntp server (Section 11.2.4.6)
•set timezone (Section 11.2.4.7)
•clear timezone (Section 11.2.4.8)
11.2.4.1 show sntp
Use this command to display SNTP settings.
show sntp
Syntax Description
None.
Command Defaults
None.
Command Mode
Read-Only.