Spanning Tree Configuration Command Set
Reviewing and Setting Spanning Tree Port Parameters
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide 6-37
•clear spantree spanguardtimeout (Section 6.2.2.19)
•show spantree spanguardlock (Section 6.2.2.20)
•clear spantree spanguardlock (Section 6.2.2.21)
•show spantree spanguardtrapenable (Section 6.2.2.22)
•set spantree spanguardtrapenable (Section 6.2.2.23)
•clear spantree spanguardtrapenable (Section 6.2.2.24)
•show spantree adminpoint (Section 6.2.2.25)
•set spantree adminpoint (Section 6.2.2.26)
•clear spantree adminpoint (Section 6.2.2.27)
6.2.2.1 show spantree portadmin
Use this command to display the status of the Spanning Tree algorithm on one or more ports.
show spantree portadmin port-string
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Only.
port-string Specifies port(s) for which to display status. For a
detailed description of possible port-string values, refer
to Section 4.1.2.