Logging and Network Management Command Set
Managing Switch Network Addresses
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide 11-59
This example sets a second MAC address – VLAN pair to egress on the same VLAN 3 ports. The
same multicast MAC address, 01:00:00:11:11:11, is used, but it is associated with VLAN 5 in this
example:
This example deletes a scoping VLAN from a configured ingress MAC address – VLAN pair:
11.2.3.25show mac multicast
Use this command to display information about all configured scoped ingress MAC address –
VLAN pairs.
show mac multicast
Syntax Description
None.
Command Defaults
None.
Command Mode
Switch command.
Command Mode
Read-Only.
Example
This example shows the output of this command:
Matrix> set mac multicast 01-00-00-11-11-11 5 3
Matrix> clear mac address 01-00-00-11-11-11 5
Matrix> show mac multicast
---------------------------------------------------------------
MAC Address Ingress VLAN Egress VLAN Counts : 2
---------------------------------------------------------------
01-00-00-11-11-11 2 3
01-00-00-11-11-11 5 3