Security Configuration Command Set
Configuring RADIUS
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide 14-3
14.3 SECURITY CONFIGURATION COMMAND SET14.3.1 Configuring RADIUS Purpose
To perform the following:
•Review the RADIUS client/server configuration on the device.
•Enable or disable the RADIUS client.
•Set local and remote login options.
•Set primary and secondary server parameters, including IP address, timeout period, and number
of user login attempts allowed.
•Reset RADIUS server settings to default values.
•Configure a RADIUS accounting server.
Commands
The commands needed to review and configure RADIUS are listed below and described in the
associated section as shown:
•show radius (Section 14.3.1.1)
•set radius (Section 14.3.1.2)
•clear radius (Section 14.3.1.3)
•show radius accounting (Section 14.3.1.4)
•set radius accounting (Section 14.3.1.5)
•clear radius accounting (Section 14.3.1.6)
For an overview on working with Host Access Control Authentication (HACA), refer to
Section 14.4.1.