Port Priority and Classification Configuration Commands
Configuring Port Traffic Rate Limiting
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide 9-35
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display the current rate limits set for Fast Ethernet front panel ports 1
and 2. In this case, rate limiting is globally disabled, and is disabled on these ports. The threshold
on all priorities queues within these ports is set to the default value of 195000 bits per second.
Frames received on these ports and within these priority queues will be discarded after the rate
limiting threshold is reached.
Matrix>show port ratelimit fe.0.1-2
Global Ratelimiting State : disabled
Threshold Packet Port
Port Priority (bits/sec) Type Status
-------- -------- ---------- --------- --------
fe.0.1 0 195000 discard disabled
fe.0.1 1 195000 discard disabled
fe.0.1 2 195000 discard disabled
fe.0.1 3 195000 discard disabled
fe.0.1 4 195000 discard disabled
fe.0.1 5 195000 discard disabled
fe.0.1 6 195000 discard disabled
fe.0.1 7 195000 discard disabled
fe.0.2 0 195000 discard disabled
fe.0.2 1 195000 discard disabled
fe.0.2 2 195000 discard disabled
fe.0.2 3 195000 discard disabled
fe.0.2 4 195000 discard disabled
fe.0.2 5 195000 discard disabled
fe.0.2 6 195000 discard disabled
fe.0.2 7 195000 discard disabled