Port Configuration Command Set
Setting Speed and Duplex Mode
4-14 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
•set port speed (Section 4.3.3.2)
•show port duplex (Section 4.3.3.3)
•set port duplex (Section 4.3.3.4)
4.3.3.1 show port speed
Use this command to display the configured port speed used when the port’s auto-negotiation state
is disabled. Note that the configured speed may be different from the current assigned speed, if
auto-negotiation is enabled.
show port speed [port-string]
Syntax Description
Command Defaults
If a port string is not entered, configured port speed settings for all ports are
displayed.
Command Type
Switch command.
Command Mode
Read-Write.
port-string (Optional) Specifies the port(s) for which speed will be
displayed. For a detailed description of possible
port-string values, refer to Section 4.1.2.