The DKC Status window displays the following:
•List:
–No.: displays serial numbers used for rows in the list
–Path Status: indicates status of a logical path (For details, see Table
–Port: indicates a port on the local storage system
–
•S/N: indicates the serial number and LDKC number of the remote storage system.
•Controller ID: displays the controller ID (model name that indicates the model) of the remote storage system.
•Path Gr. ID: indicates a path group ID.
•
•Minimum Paths: Indicates the minimum possible number of paths between the local and the remote storage systems.
•RIO MIH Time: indicates the RIO MIH timer value, which is the wait time until data transfer from the local storage system to the remote storage system is complete.
Note: RIO MIH is an acronym for remote I/O missing interrupt handler.
•DKC Registered: Indicates the date and time when the local and the remote storage systems are associated to each other.
•Last Updated: indicates the date and time when the last operation on a logical path to the remote storage system was performed.
•Refresh the DKC Operation tab after this panel is closed: If you select this check box, information in the DKC Operation window will be refreshed after you close the DKC Status window.
•Refresh: refreshes the information in the DKC Status window.
•Close: closes the DKC Status window.
Table 5-1 Logical Path Status
Status
Remarks
| Normal |
| This path has been successfully established and can be used for URz remote copy activities. |
|
|
|
|
|
|
| Nothing |
| An operation for configuring or deleting this logical path is in progress. |
|
|
|
|
| |
| Initialization Failed | An error occurred with initialization of connection between the local and the remote storage |
| |
|
|
| system. The probable causes are: |
|
|
|
| • No cable is connected to the local storage system. |
|
|
|
| • No cable is connected to the remote storage system. |
|
|
|
| • No cable is connected to the network device that comes between the local and the remote |
|
|
|
| storage system. |
|
|
|
|
|
|
| Chapter 5 Configuring Storage Systems and Logical Paths |
| ||
|
|
|
|
|
|
| Hitachi Universal Replicator for IBM /OS User’s Guide |
| |
