
Releasing a Pair of Data Volumes
The Delete Pair window (Figure
When one journal group uses two mirror IDs, the result of the operation differs as follows according to the status of the mirror of specified URz pair.
•When you specify a mirror of the URz pair in Hold or Hlde status, only the URz pair of the specified mirror will be deleted.
•When you specify a mirror of the URz pair that is not in Hold or Hlde status, URz pairs of both mirrors (including the mirror which you do not specified) will be deleted.
To release one or more pair(s), follow the procedure below. Not only the primary storage system administrator but also the secondary storage system administrator can perform this operation:
1.Ensure that the Storage Navigator main window is in Modify mode.
For detailed information about how to do this, please refer to Storage Navigator User’s Guide.
2.Ensure that the Pair Operation window is displayed.
3.In the tree, select a CU image number.
4.In the list, select and
5.From the
6.In the Delete Pair window, select the desired options for the pair(s).
7.Select Set to close the Delete Pair window.
8.See the Preview list in the Pair Operation window to check the settings that you have made.
–If you want to modify a setting, select and
–If you want to cancel a setting, select and
9.Select Apply to release pair(s).
Note: If an error occurs, the rightmost column of the Preview list displays the error code. To view detailed information about the error,
10.In the list of the Pair Operations window, verify that the pair(s) has been released successfully. If the pair has been released, the status of the pair is Simplex.
Chapter 8 Performing Pair Operations |