Hitachi MP-96RD625-01 manual Performing Pair Operations

To perform remote copy operations with URz, you must create pairs of a primary data volume and a secondary data volume. A primary data volume is a data volume to be copied. A secondary data volume is a data volume that is the copy destination for a primary data volume. To manipulate pairs of these data volumes, use the Pair Operation window of URz.

Note: This manual sometimes uses the term "volume pair" when referring to a pair of a primary data volume and a secondary data volume.

Filtering Information in the List in the Pair Operation Window

The Display Filter window (Figure 8-1) enables you to filter information in the list in the Pair Operation window. The list will display only the volumes that satisfy certain conditions.

To filter information in the list in the Pair Operation window:

1.In the Pair Operation window (Figure 4-2), select Display Filter.

2.Use the Display Filter window to specify information that you want to display in the list.

3.Select Set to close the Display Filter window.

The list in the Pair Operation window displays the specified information only.

Notes:

•To restore the list to the default status (i.e., the status before filtering), select Reset in the Display Filter window and then Set in the same window.

•If you change settings in the Display Filter window, the changes will remain effective during the URz session until you reset the settings.

8-2 Chapter 8 Performing Pair Operations

Hitachi Universal Replicator for IBM /OS User’s Guide