–Entire: Whole data in primary data volume will be copied to secondary data volume when delta resync operation cannot be performed. The default is Entire.
–None: No processing will take place when delta resync operation cannot be performed. Therefore, the secondary data volume will not be updated.
Caution: This option cannot be specified in the secondary site.
•Timer Type: Allows you to specify the type of clock used for consistency time.
–System: The system clock of the mainframe host is used.
–Local: The system clock is not used.
–None: The system clock of the mainframe host is used. The difference between System and None is explained in section Timer Type Option.
Notes:
–Ensure that the same timer type is specified in both the primary and the secondary sites.
–If
–You can only specify None if the journal group belongs to an extended consistency group.
•Set: Applies the settings in the window to the Journal Operation window (Figure
•Cancel: Cancels the settings.
Chapter 6 Configuring Journal Groups |
